Serving Georgia Open 7 days · Mon–Fri 7AM–8PM Licensed & insured · 90-day warranty (844) 442-1999
Call for an upfront quote(844) 442-1999
Serving Georgia

Pre-Rinse Spray Station Repair in Georgia

When your pre-rinse spray station stops working, it throws off the whole day. Our technicians repair pre-rinse spray stations in Georgia, starting with a proper diagnosis and an upfront quote before any work begins.

Call (844) 442-1999 Book online
  • Upfront quote before work
  • 90-day parts & labor warranty
  • Parts matched to your model
  • Same-day service when available

Request service

Tell us what's wrong. We'll call you back to schedule.

We only use your details to arrange the repair. No spam.

or call now
(844) 442-1999
Licensed & insuredFully insured technicians
90-day warrantyOn parts and labor
Upfront pricingApprove the price first
248 appliance types426 brands serviced
Overview

How we repair your Pre-Rinse Spray Station

A pre-rinse spray station is a commercial faucet assembly with a spring-mounted hose and spray valve used to blast food off dishes before they go into the dishwasher. Every pre-rinse spray station uses a water inlet valve, a wash or circulation pump, spray arms, a heater, a drain pump and a control with sensors. A technician checks fill, wash, heat and drain steps one at a time to find the failed part.

Commercial dishwashers must hit sanitizing temperatures for health code compliance, so a failed heater or booster is a priority call.

Pre-Rinse Spray Station repair at a glance

  • Typical repair cost$75–$250
  • Typical service life5–10 years
  • Warranty on repairs90 days parts & labor
  • QuoteUpfront, before work
  • Same-day visitsWhen available
Call (844) 442-1999
Diagnosis

Common Pre-Rinse Spray Station problems we fix

What usually causes each symptom, and what our technician checks to confirm it.

Hose leaks or bursts

Likely causes
A worn or kinked hose from repeated flexing or contact with hot surfaces.
What our technician checks
The hose is inspected along its length and at the fittings.

Water temperature will not mix

Likely causes
Worn cartridges or stems, failed check valves allowing crossover, or a closed supply stop.
What our technician checks
Cartridges, stems and check valves are inspected and supply stops are checked.

Weak spray

Likely causes
A clogged spray face, debris in the check valves or low supply pressure.
What our technician checks
The spray face and check valves are cleaned and supply pressure is measured.

Spray valve leaks or drips

Likely causes
A worn valve seat or O-ring, a cracked spray head or a loose hose connection.
What our technician checks
The spray valve is disassembled and the seat, O-rings and threads are inspected.

Spring or riser is loose or wobbles

Likely causes
A loose wall bracket, a missing set screw or a worn riser connection.
What our technician checks
The wall bracket, riser and set screws are inspected and tightened.

Add-on faucet will not shut off

Likely causes
A worn stem washer or cartridge in the add-on faucet.
What our technician checks
The add-on faucet stem or cartridge is inspected and rebuilt.
Before you call

Quick checks you can do safely

  • Unscrew and clean the spray face holes.
  • Check both supply stops under the station are open.
  • Look for kinks or cracks along the hose.
  • Tighten the hose nut at the spray valve by hand.
  • Make sure the spray valve handle springs back fully.

Safety first: Pre-rinse water is very hot, so point the spray valve down into the sink when testing it.

Still not working?

Call and describe what you see and hear, plus any error code. It helps the technician bring the right parts on the first visit.

(844) 442-1999

Seeing a code? Try our error code lookup or troubleshooting wizard.

How it works

Our 5-step pre-rinse spray station repair process

  1. Call or book onlineTell us the appliance, brand and what it is doing. We confirm a visit window that works for you.
  2. DiagnosisThe technician inspects and tests the pre-rinse spray station to find the actual cause, not just the symptom.
  3. Upfront quoteYou get a clear price before any work starts. No surprise charges.
  4. RepairWe fix it with parts matched to your model, often on the same visit when the part is on the truck.
  5. Test and warrantyWe test the unit under normal operation, clean up and back the repair with a 90-day parts-and-labor warranty.
Pricing

Pre-Rinse Spray Station repair cost and lifespan

Typical repair cost$75–$250
Typical service life5–10 yrs

National ballpark estimates. Your exact price depends on the part and labor, and you get it upfront after diagnosis. On the fence? Try the repair vs replace calculator.

Parts we replace most often

  • Spray valve
  • Flexible hose
  • Overhead spring
  • Wall bracket
  • Faucet cartridges
  • Check valves
  • Spray face

We match every part to your model and serial number.

Maintenance

Keep your Pre-Rinse Spray Station running longer

  • Replace the hose at the first sign of wear.
  • Clean the spray face weekly.
  • Keep the hose away from hot equipment.
  • Check the wall bracket for looseness monthly.
  • Rebuild valves before drips become constant.

Build a maintenance plan

Create a printable monthly, quarterly and yearly checklist for every appliance in your home.

Open the schedule generator
Local service

Pre-Rinse Spray Station repair in Georgia

Hot, humid summers and mild winters in Georgia keep refrigerators, laundry machines and ovens in Georgia in steady use.

We provide pre-rinse spray station repair in cities and towns across Georgia, from large metro areas to smaller communities.

Also serving nearby

Choose your city on the Georgia page for local details.

Brands

Pre-Rinse Spray Station brands we repair

FAQ

Frequently Asked Questions

How much does pre-rinse spray station repair cost in Georgia?

Most pre-rinse spray station repairs fall roughly between $75 and $250, depending on the part and labor involved. That is a national ballpark estimate; you get an exact quote after diagnosis and before any work starts.

Can you repair my pre-rinse spray station the same day?

Often, yes. Call (844) 442-1999 early in the day and we will try to schedule a same-day visit. Same-day service depends on technician availability and whether the part is in stock.

Is the repair guaranteed?

Yes. Completed repairs are covered by a 90-day parts-and-labor warranty. If the same problem comes back in that time, we come back and fix it.

Which brands do you service?

We work on all major brands, including Fisher, Krowne and T&S Brass.

Should I repair or replace my pre-rinse spray station?

A typical pre-rinse spray station lasts about 5 to 10 years. If yours is well within that range and the repair costs less than half the price of a new one, repair is usually the better value. Our technician will tell you honestly if replacement makes more sense.

Related

Other dishwashers repairs

More repair services

Get your pre-rinse spray station fixed in Georgia

Upfront quote before work starts · Parts matched to your model · 90-day warranty

(844) 442-1999 Book online
Call now Book